Hydroponics Dual System Timer

HYDROPONICS TIMER SYSTEM MANUAL

Real-time Hydroponics timer system (HTS) V.1 provides a better man-to-machine interface, a self-dictated system, and better nu- trient ability, and make the environment grow faster and healthier plants, with the help of HTS V.1, you can save electricity by automatically handling grow lights and nutrient motors as shown in figure.1.\

--->Input: 180vac to 280vac

--->Output: Output voltage same as Input voltage with two different channel outputs namely Minute and Hour channels for nutrient motors and grow lights respectively

--->Wattage: 300 watts Max for each channel. Note (Running a heavy load than the Max load (300w max) can lead to damage to the channel output).

OPERATION OF TIMER:

After powering on the timer system, it will start operation as defined in the timer system shown in figure.2 and figure.3.

Users can adjust the duty cycle timing of both channels as per requirements with the help of an inbuilt keyboard. The timer system keyboard has four buttons as name Mode, UP, Down, and Enter

How to set duty cycle timing of both channels:

--->First of all press the Mode key and follow the instruction given by the timer system followed by the Up, Down, and Enter keys. After pressing the Mode key first screen appears as.

--->Set Hour ON time with the help of Up and Down followed by Enter key. Next

--->Set Hour OFF time with the help of Up and Down followed by Enter key. Next

--->Set Minute Duty Cycle with the help of Up and Down followed by Enter key. Next

--->Set Minute ON time with the help of Up and Down followed by Enter key. After setting all settings in the system screen will appear which is shown in the first line of the display.

How to set the real-time clock

--->First of all press the Mode key for at least 10 Sec and follow the instruction given by the timer system followed by the Up, Down, and Enter keys. After pressing the Mode key first screen appears as

--->Press Mode to start setting RTC. Next

--->Set Current Hour time in 24Hr (1-23) format with the help of Up and Down followed by Enter key. Next

--->Set Current Minute time (1-59) with the help of Up and Down followed by Enter key. Next

--->Set Second(1-59) time with the help of Up and Down followed by Enter key. Next

--->Set Day(1-7), Example: for Sunday set 1 and Monday set 2 respectively with the help of Up and Down followed by Enter key. Next

--->Set Current Date(1-31) with the help of Up and Down followed by Enter key. Next

Note: Before Starting the Operation of the System user need to first set the Clock otherwise the system will not start operation